Water-based facade protector
Nano insulation
Water-based facade protector
• Nano insulation
It is a multi-purpose waterproofing product with 100% active nano monomer technology consisting of organo-silane compounds and soluble in water.
Product code: STAR SIL PN8
This waterproof material is used for waterproofing and preventing capillary penetration in new and old construction surfaces, such as: surfaces of concrete, cement, all types of bricks, cement blocks, stone, mosaic, pottery, horizontal and vertical wall bonding and grout surfaces with environment and it is a compatible material. This product is designed and manufactured in. It is free of any volatile organic compounds and is used in situations where there is a need to protect against the penetration of water with capillary properties into the structure. It has very small particles (about a few nanometers), which enables it to penetrate into (old and new) building materials and protect them against water penetration and absorption, weathering, scurf, fungus growth, mold, and other subsequent destructive reactions, protect. One of the unique features of this product is its quick reaction, which leaves an extraordinary water-repellent effect with breathability on the surfaces after drying.
• Preventing the absorption and capillary penetration of water in structures
• Penetration in the depth of the structure and rapid waterproofing of the surface
• No gloss surfaces
• A water-based system free of volatile organic compounds (VOC-Free), convenient and easy to apply using a brush, roller or spray.
• Very high and affordable coverage
• No change in the color or appearance of the structure
• Very quick response
• Failure to prevent concrete from breathing
• Resistant to ultraviolet ray (UV)
• Surface protection against the growth of moss, fungus, and algae
• Prevention of surface pollution, stains, and dandruff
- Bridges
- New and old buildings
- Ancient and cultural monuments
- Coastal areas
- Concrete and cement surfaces
- Prefabricated cement and concrete parts
- Brick, clay, and ceramic pieces
- Stones
Every 20 kg of this product is CONSUMED for 100 square meters.
Surface preparation has a great influence on coating performance. The surfaces must be dry, clean, and free of loose particles, any oily substances and other defects before implementation and should be dimensionally stable. Concrete surfaces must be at least 28 days old and fully cured before implementation. The mortar for pointing brick surfaces must be at least 3 days old. It should be applied on surfaces with a temperature higher than 10 degrees Centigrade. The surfaces must be completely dry and rain should not be expected for at least half a day after its implementation. The method of using this substance is as a diluted solution with clean water and free of hardness by spray, brush, and roller. The diluted solution of this compound should be used within 24 hours.
- Mix (weight) ratio: product component: 1 and water component: 5
- Temperature during use (C˚): 10-35
- Coverage amount (square meters/kg): 20-30
- Drying time: 24 hours
- Packaging: 10 and 20-liter gallons
- Shelf life: 1 year in original packaging
- Store in a dry place away from direct sunlight, water, and rain
- Best storage temperature: +5 to +35 degrees Centigrade
This material is not included considered to be dangerous and harmful for health and the environment, however, it should not be swallowed or come into contact with eyes. Gloves, glasses, and work clothes should be used during application in case of accidental contact with the skin or eyes. It should be washed with plenty of fresh water.
