Pool insulation
single-component
Pool insulation
– single-component
Perhaps you have also wondered what the pool insulation is and what it is used for. We will give you the necessary explanations in the product description. Stay with us. It is a one-component acrylic and nano insulation suitable for covering capillary cracks and complete caulking of pools and reservoirs.
Product Code : STAR POOLWP80
Starpool-WP80 pool insulation product can be used in both new and old pools. It has high durability and adhesion and is flexible and that is why it is used as a colorful caulking coverage based on nano-acrylic in swimming pools and drinking water tanks.
- Breathable and anti-scurf inside the pool
- Easy and cheap usage, maintenance, and repair
- Non-toxic, hygienic, and environmental-friendly
- Excellent adhesion to surfaces
- Flexible, resilient, and non-permeable
- Insulating in an integrated way in blue color, easy to use
- Being elastic and resistant to capillary cracks
- Retention of quality, color, and integrity in different conditions
- Pool caulking
- Caulking the fountain and reservoirs
- Water storage and septic caulking
The consumption of pool insulation is 1 kg per square meter.
This insulation can be applied on smooth cement or concrete surface. Before starting, the surface should be cleaned and free of grease and executed by removing the loose points. In addition, all the seams (fissure) existing in the pool should be repaired by star repair-ps55 product. If possible, it is better that the joints between the floor and the wall should be tightened in the corners. And if there is a need and the pool may crack in walls, then a net should be used in the walls and floor.
First, dilute the pool water insulation by 10% water and apply it on the surface by a brush or as a spray. Then, after the drying of the previous step, dilute 500 to 750 grams of pool water insulation by 10% water and apply the second and third It can be drained after full execution after seven days depending on the weather conditions of the pool.
Note: The execution should be performed at a temperature above +10 degrees Centigrade.
- Color: White, gray, standard blue
- Amount of polymer: 64%
- Specific gravity: 1.2
Membrane obtained from fresh liquid: kg/lit
- Adhesion to the bottom layer: (N/mm2) 1/1 ASTM D4541:2009
- Water vapor transmission: ASTM E96:200527
- Weather resistance, resistance to UV
- ASTM D2240-05 meter and round hardness
- Packaging: 15 and 30-kg buckets
- storage duration: 1 year in original packaging
- Store in a dry place away from direct sunlight, water, and rain.
This substance is not in the range of hazardous and harmful substances for health and the environment, however, it should not be swallowed or come into contact with the eyes. Gloves, glasses, and work clothes should be used during the application. In case of accidental contact with the skin or eyes, it should be washed immediately with plenty of fresh water
