Latex concrete glue
Latex concrete glue for concrete caulking
Latex concrete glue
for concrete caulking
Latex concrete glue is one of the products in the field of caulking concrete structures. The operational nature of this material is based on glue and adhesive strength, and therefore, it can also be considered a suitable option for repairs in addition to caulking.
Product code: STAR LATEX BSF
Latex concrete adhesive is a typical latex copolymer that is used to repair and caulk the concrete structures due to its excellent adhesion creating a strong bond. The most important production goals of this product are: Suitable for making adhesive (sticky) mortars for concrete surfaces, usable as a calking material and a strong adhesive agent for the repair of cement and concrete surfaces when combined with mortar. It creates a typical modified polymer system in the molecule composition that causes a very high adhesion of concrete.
We are going to explain the properties and effects of latex concrete adhesive in this section. Please contact us if you need more information.
- Increasing the adhesion strength of mortar to old concrete without using metal nets
- Reduction of cracks due to non-shrinkage
- Increased resistance to frost cycles
- Resistant to deicing (defrosting) salts
- Suitable for caulking drinking water sources and swimming pools
- Increasing elasticity, flexibility, and strength of materials
- Usable for surfaces that are scurf and shedding (collapsing)
- Increased surface resistance
- No corrosion in metals
- Suitable for use on vertical and horizontal surfaces
- Anti-vapour, oil, grease, and chemicals
- Anti-wear in wet conditions
- Non-toxic
- Caulking the upper and lower concrete surfaces
- Preparation of mortars and linings for caulking water sources, swimming pools, sewage plans, treatment plants, concrete surfaces of walls and floors of factories, warehouses, parking lots, and underpinning for flooring (floor covering).
- Repair and reconstruction of porous concretes in the foundation, pillar of bridges and old damaged concretes
- Increasing surface adhesion before cementing, plastering, and joinery
- Repair of broken bricks, ceramics, and tiles
- Stabilizing and gluing loose bricks
- Repairing surfaces and walls from prepared molding materials
- Preparation of stone filler (primer) to fill the stone pores after installation or in quarries
- Preparation of adhesive mortar for global smoothing of concrete surfaces
Latex concrete glue is used about 1 kg per square meter with a thickness of one centimeter for cementing mortar and 0.5 kg is used for smoothing per square meter with a thickness of 3 mm.
Stone installation mortar
The sticky mortar for the stone installation on the floor is prepared from a 30% solution of concrete glue along with water in sand and cement. The amount of consumption per square meter with a thickness of 2 mm is one kilogram.
Strengthening powder ceramic glue
A 50% solution of latex glue with water is used as a strengthening agent in powder glue.
Preparation:
Any pollution, grease, dust, surface decay should be removed, and the surfaces should be covered with a tent against the sun in hot weather.
- Physical state: liquid
- Color: white
- Specific gravity: 0.05+1.05 g/cm3
- Chlorine ion: N/A
- Storage duration: one year in original packaging
- Storage conditions: closed container, away from moisture and direct sunlight
- The best storage temperature: +10 to +30 degrees centigrade
- Packaging type: 4, 10, and 20-kg gallons
This latex concrete adhesive material is not considered to be dangerous and harmful for health and environment, however, it should not be swallowed or come into contact with eyes. In case of accidental contact with the skin or eyes, it should be washed immediately with plenty of fresh water. If swallowed, seek medical attention immediately. Please refer to the safety data sheet. This substance is not flammable.
